UV LED: UV Ink LED Curing Device for Screen Printing Offset Printing Gravure Printing Flexo Printing
The UV LED curing device uses the UV LED high-power imported chip as the light source to produce high-purity single wavelength cold light source. Intermittent switch, no heat radiation, super illumination, fast curing speed, low energy consumption, environmental protection, pollution-free, small volume, simple installation and space saving. In Offset printing, gravure printing, flexo printing, screen printing, high speed ink-jet printing and other high-speed printing press, our high-energy intensity design scheme to achieve better results.
PDF Datasheet Download of UV Ink LED Curing Device for Screen Printing Offset Printing Gravure Printing Flexo Printing
Machine Characteristics:
l The UV LED curing device uses the UV LED high-power imported chip as the light source to produce high-purity single wavelength cold light source.
l Long life: the service life of UV LED lamp is more than 10 times that of traditional mercury lamp, and the service life is not affected by the switching times.
l Intermittent switch, no heat radiation, super illumination, fast curing speed, low energy consumption, environmental protection, pollution-free, small volume, simple installation and space saving.
l The integral three-stage illumination of the irradiation surface can be turned on as needed. Signal control UV light on and off.
l Instantaneous switch, can achieve the maximum power UV output without preheating, and can restart instantly after closing.
l UV LED curing system is easy to operate, which can be turned on and on immediately, saving standby power consumption and improving production efficiency.
l It is convenient to customize, and the effective irradiation area can be customized, and the corresponding LED UV can be customized according to the customer's model.
l In Offset printing, gravure printing, flexo printing, screen printing, high speed ink-jet printing and other high-speed printing press, our high-energy intensity design scheme to achieve better results.
l The LED UV light source has no mercury and no lampshade and other accessories, which effectively reduces the equipment maintenance cost and fully conforms to the national environmental protection policy.
Specifications:
Cooling Mode | Water-cooling |
Working Voltage | 200-240VAC, 50Hz |
Compressor Power | 470W |
Total Power Consumption | 1470W |
Light Power of UV Lamp Base | 16000mW/cm² |
Notes: Specifications are subject to change without further notification, please contact with Huayu Automation before ordering.